Cleaning And Care; Cleaning The Milk Nozzle And Milk Tank - Silvercrest SEMM 1470 A1 Instrucciones De Uso

Cleaning and care

WARNING – RISK OF INJURY!
■ Always remove the plug from the mains power socket before you clean the
appliance. Danger of electric shock!
Never immerse the appliance in water or other
liquids. Danger of electric shock!
■ Always allow the appliance to cool down before cleaning it. Risk of burns!

Cleaning the milk nozzle and milk tank

CAUTION – PROPERTY DAMAGE
■ Never use abrasive, aggressive or chemical cleaning agents to clean the
appliance. These could damage the outer surfaces of the appliance.
1) Switch the appliance off using the on/off switch
from the wall socket.
2) Remove the milk tank
3) Clean the milk tank lid
mild washing-up liquid.
4) Rinse both parts off with clear water and then dry them well.
5) Fill the milk tank
and push the milk tank
6) Place a suitably large, empty container onto the drip grille
milk nozzle
7) Insert the plug into a mains power socket and switch on the appliance using
the on/off switch
8) Wait until all control lamps light up permanently.
9) Set the "Milk quantity" knob
10) Press the "Large" latte button
the "Large"
"Large"
steam comes out of the milk nozzle
SEMM 1470 A1
from the appliance and take off the milk tank lid
and the milk tank
with water (approx. 100 ml), replace the milk tank lid
back into the appliance.
so that it points into the container.
.
to the position "Clean"
2x in a row. The control lamps of
and "Small" cappuccino buttons
and "Small" latte buttons
and pull the mains plug
in warm water with a little
.
, as well as the
flash alternately and hot
.
GB │ IE
.
and move the
│ 53 ■