Kohler K-3942-3-NA Guia De Instalacion página 10

1. Cut inside line.
6. Cut the Countertop
IMPORTANT! To avoid damaging visible cabinet surfaces, cut the
countertop in the order instructed.
TIP: To prevent chipping the laminate, apply painter's tape to the
edge of the countertop before cutting.
First, cut the countertop along the inside marked line.
Second, carefully cut away from the cutout to the marked notch
line. Use care not to damage the cabinet face.
Repeat for the other side.
Third, carefully cut in from the edge of the countertop to intersect
with the previous cut. Use care not to damage the cabinet face.
Repeat for the other side.
Proceed to the "Install Support Rails and Sink" section.
1389373-2-A
2. Cut away from cutout,
flush with cabinet face.
3. Cut to intersect
with previous cut.
Do not damage
cabinet face.
10
Do not cut
beyond
marked line.
Kohler Co.