Tools And Materials; Before You Begin - Kohler K-3942-3-NA Guia De Instalacion

Tools and Materials

100% Silicone
Painter's
Sealant
Tape

Before You Begin

WARNING: Risk of personal injury. Metal surfaces are
sharp and can cause severe cuts. Use gloves and handle sink
edges carefully.
IMPORTANT! Refer to the "Roughing-In" section for cabinet
dimensional requirements.
IMPORTANT! Long screws may damage adjacent cabinets. Ensure
that the screws are long enough to secure the support framing, but
short enough so they do not extend through the walls of adjacent
cabinets.
This guide provides two methods of installation: new
construction and retrofit. Follow the sections that apply to your
installation.
Use proper fasteners and techniques to ensure that the frame will
support a minimum of 300 lbs (136 kg). Locate the fasteners for
easy access in the event the sink needs to be removed in the
future.
For K-3935 Only: This sink is intended for installation into a
standard 30" base cabinet.
For K-3942 and K-3944 Only: This sink is intended for
installation into a standard 36" base cabinet.
Observe all local plumbing and building codes.
1389373-2-A
Plus:
• Suitable Support Framing
Material [1/2" (13 mm)
Max Thickness]
Wood
Screws
2 Kohler Co.