Maintenance; Preventative Maintenance - Kapro Prolaser 894 Visi-Cross Manual Del Usuario

Preventative Maintenance

· Store in a clean dry place, between 5°F – 131°F (-15°C – 55°C)
· Before moving or transporting the unit, ensure that it is turned off/locked.
· If the Cross Laser is wet, dry off with a dry cloth. Do not seal the laser
in the carrying case until completely dry.
· Do not attempt to dry the Cross Laser by fire or with an electric dryer.
· Do not drop the Cross Laser, avoid rough treatment, and avoid constant
vibration.
· Periodically check the calibration of the Cross Laser.
· Clean with a soft cloth, slightly dampened with a soap and water solution.
Do not use harsh chemicals, cleaning solvents or strong detergents.
· Keep the laser aperture of the Cross Laser clean by wiping it gently with
a soft lint-free cloth.
· Keep the Detection window of the Laser Detector clean by wiping it with
a soft cloth moistened with glass cleaner.
· Remove batteries from the laser level and detector during lengthy periods
of non-use, and store in carrying case.
· Ensure that the Cross Laser is turned off before removing batteries.
Repairs
· See the Warranty section at the end of this manual.
· Do not take the Prolaser
person to take the laser level apart. Unauthorized servicing may cause
bodily injury, irreparably damage the Cross Laser, and invalidate the
warranty.
13
CARE AND MAINTENANCE
894 Visi-Cross
®
apart or permit any unqualified
™