Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Remember
Allow
24 hours to produce
the first batch of ice. Allow
3 days
to completely
fill the ice storage
bin. Discard the first three
batches
of ice produced.
The quality
of your ice will be only as good as the quality
of the
water
supplied
to your ice maker. Avoid
connecting
the ice
maker
to a softened
water
supply. Water
softener
chemicals
(such as salt) can damage
parts of the ice maker
and lead to
poor quality
ice. If a softened
water supply
cannot
be avoided,
make sure the water
softener
is operating
properly
and is well
maintained.
•
Do not store anything
on top of the ice maker
or in the ice
storage
bin.
To remove
and replace
the crisper(s):
1.
Slide crisper(s)
straight
out to the stop. Lift the front of the
crisper(s)
and slide out the rest of the way.
2.
Replace
the crisper(s)
by sliding back in fully
past the drawer
stop.
REFRIGERATOR FEATURES
Your model may have some or all of these features.
important
information
to know about
glass shelves
an_ covers:
Do not clean glass shelves
or covers
with warm
water
when
they are cold.
Shelves
and covers
may break
if exposed
to
sudden
temperature
changes
or impact,
such as bumping.
Tempered
glass
is designed
to shatter
into many
small,
pebble-size
pieces.
This is normal.
Glass shelves
and covers
are heavy.
Use both
hands
when removing
them to avoid
dropping.
The shelves in your refrigerator
are adjustable
to meet your
individual
storage
needs.
Storing
similar
food
items together
in your refrigerator
and
adjusting
the shelves to fit different
heights of items will make
finding
the exact
item you want easier. It will also reduce the
amount
of time the refrigerator
door is open, and save energy.
Shelves
and Shelf Frames
To remove
and replace
a shelf/shelf
frame:
1.
Remove the shelf/frame
by tilting
it up at the front and lifting
it
out of the shelf supports.
2.
Replace
the shelf/frame
by guiding
the rear shelf hooks into
the shelf supports.
Tilt the front of the shelf up until rear shelf
hooks drop into the shelf supports.
3.
Lower the front of the shelf and make sure that the shelf is in
position.
To remove
the crisper(s) cover:
1.
Remove crisper(s).
2.
Holding
the glass insert firmly
with one hand, press up in center
of glass insert until it rises above
the plastic frame.
Gently
slide
the glass insert forward
to remove.
3.
Lift the cover
frame
up and remove
it.
To replace
crisper(s) cover:
1.
Fit back of cover frame
into supports
on side walls of the
refrigerator
and lower the front of the cover frame
into place.
2.
Slide rear of glass insert into cover frame
and lower front into
place.
You can control
the amount
of humidity
in the moisture-sealed
crisper. Adjust
the control
to any setting
between
LOW
and HIGH.
LOW
(open)
lets moist air out of the crisper
for best storage
of
fruits and vegetables
with skins.
•
Fruit: Wash,
let dry and store in refrigerator
in plastic
bag or
crisper. Do not wash or hull berries
until they are ready
to use.
Sort and keep berries in original
container
in crisper, or store in
a loosely closed
paper
bag on a refrigerator
shelf.
•
Vegetables
with skins: Place in plastic
bags or plastic container
and store in crisper.
HIGH
(closed)
keeps moist air in the crisper for best storage
of
fresh, leafy vegetables.
•
Leafy vegetables:
Wash
in cold water, drain
and trim or tear
off bruised and discolored
areas. Place in plastic
bag or plastic
container
and store in crisper.
16
Publicidad
Tabla de contenido
