Kohler K-T9493 Guia De Instalacion página 10

Complete Trim Installation – All Models (cont.)
Let the water run briefly and check the water temperature with
the thermometer again to confirm that it returns to 104° F (40° C).
Once confirmed, turn off the water.
NOTE: If any of the water temperatures do not match the knob
mark settings, repeat the mixing valve calibration steps in the
"Water Temperature Adjustment" section.
Press the cap onto the valve so the cap detent is in line with knob
button (as shown in the illustration). If needed, apply a small
amount of lubricant to the inside wall of the cap to aid in
assembly; a capsule of lubricant is included in the hardware kit.
1012606-2-B 10 Kohler Co.