Technical Parameters; Environment Protection - GRAPHITE 59G323 Instrucciones De Uso

Entrust replacement of carbon brushes only to a qualified person. Only original parts should be
used.
All faults should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Supply voltage
Current frequency
Rated power
No load rotational speed
Oscillations per minute
Oscillation travel
Size of backing pad
Size of sanding paper
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure Lp = 71.4 dB(A) K = 3 dB(A)
A
Sound power Lw = 82.4 dB(A) K = 3 dB(A)
A
Weighted value of vibration acceleration a
Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants.
Obtain information on wastes utilization from your seller or local authorities. Used up electric and electronic
equipment contains substances active in natural environment. Unrecycled equipment constitutes a potential risk
for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.

TECHNICAL PARAMETERS

Finishing Sander
2
= 7.69 m/s K = 1,5 m/s
h

ENVIRONMENT PROTECTION

13
Value
230 V AC
50 Hz
380 W
6000 - 11000 rpm
12000 - 22000 min -1
2 mm
113x225 mm
115x280 mm
II
2.1 kg
2014
2