Kingston DataTraveler 2000 Manual De Instrucciones página 27

4. Proceed by clicking on Format disk. Select FAT32 or NTFS depending on your needs, enter a Volume Label
and click Start.
WARNING:
5. Click OK to continue with formatting the drive
6. The computer will finish formatting the drive and confirm that formatting has been completed. While the
DT2000 is formatting, the
Once finished, the
Blue
Note: If the formatting wizard does not appear, follow the procedures below:
1. Right-click My Computer or Computer and then click Manage.
Document No. 480ADT2000.B00
This procedure will erase ALL DATA stored on the drive.
LED will flash.
Blue
LED becomes solid and your DT2000 is ready for use.
DT2000
Page 26 of 30