Delete All Files In Admin Mode - Kingston DataTraveler 2000 Manual De Instrucciones

Delete All Files in Admin Mode

In the event that an Admin wants to delete all data stored on the DT2000, please follow the instructions below.
All Admin settings will remain on the DT2000 but all data will be deleted and cannot be retrieved and the
DT2000 will have to be reformatted.
Entering the Admin PIN to access a locked drive will clear the User PIN. For
Caution:
security reasons, we highly recommend that a new User PIN be created immediately
once the drive has been unlocked using the Admin PIN. Refer to
Admin Mode.
Instructions
1. Unlock the DT2000 with Admin PIN
2. Press the KEY button 3 times (triple-
click)
3. Within 10 seconds begin to press the
number 3 (Def) button followed by
the number 2 (Abc) button (32)
4. Press KEY button once
5. Within 10 seconds begin to enter
your Admin PIN again
6. Press KEY button once
Document No. 480ADT2000.B00
LED LED State
solid LED followed by a flickering
Red
LED indicating successful Admin PIN entry
and LEDs flicker together
Green Blue
and LEDs continue to flicker together
Green Blue
and LEDs blink alternately
Red Green
and LEDs continue to blink
Red Green
alternately
solid LED to
Red Red
flickering LED indicating that all data has
Green
been deleted
DT2000
Creating a New User PIN in
Green
& solid LEDs to a
Green
Page 23 of 30