Overview; Design And Function; Choosing The Correct Pneumatic Breaker For A Task; Main Parts - Chicago Pneumatic CP 0111 CHLA Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions

Overview

To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.

Design and function

The CP 0111 handheld pneumatic breaker is
designed for light- to medium constructions and
plant maintentance work.
CP 0111 CHLA and CP 0111 CHIT are fitted with a
D-handle and can be used both horizontally and
vertically.
No other use is permitted.
To choose the correct insertion tool, see the spare
parts list.
Choosing the correct
pneumatic breaker for a
task
It is important to choose the correct size of
pneumatic breaker for the work to be performed.
A pneumatic breaker that is too small means that
the work will take longer.
A breaker that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic breaker is that a normal sized piece of
broken material should be removed from the
workpiece within 10–20 seconds operation.
> If it takes less than 10 seconds a smaller
pneumatic breaker should be selected.
> If it takes more than 20 seconds a larger
pneumatic breaker should be selected.
10
CP 0111 CHLA, CP 0111 CHIT

Main parts

Trigger
A.
Handle
B.
C. Air inlet
D. Cylinder
Latch (tool retainer)
E.

Signs and stickers

The machine is fitted with signs and stickers
containing important information about personal
safety and machine maintenance. The signs and
stickers shall always be easy to read. New signs and
stickers can be ordered by using the spare parts list.
9800 0809 90