Setting The Display - Eton SOUND 140 CONCERTO El Manual Del Propietario

ROUGHLY SETTING THE SLEEP TIMER
1. Press the SLEEP button, use the TUNE +/-(
15-30-45-60-75-90 min, then press ENTER.
2. After setting the display shows SLEEP.

SETTING THE DISPLAY

1. Press the SET button, use the TUNE +/-(
DISPLAY, then press ENTER.
2. Use the TUNE +/-(
brightness (AU-01-02-03-04-05), then press ENTER.
NOTE: When you set the display's backlight brightness as "Au" mode,
the brightness will automatically change with the environment.
/ ) buttons to adjust the display's backlight
SOUND 140 OWNER'S MANUAL
SOUND 140 OWNER'S MANUAL
/ ) to select 00-
/ ) buttons to select
1