Setting The Clock - Eton SOUND 100 Manual Del Propietário

2. Press the MEMORY button for 2 seconds; the memory number will
flash in the LCD,
3. Immediately select the desired memory number with TUNING/SET
buttons.
4. Press the MEMORY button again.
ACCESSING MEMORY PRESETS
Tune to the band of your choice, AM or FM.
Use quick, short presses of the MEMORY button to choose stored
station of your choice, or use the remote's buttons 1-5.
SETTING THE CLOCK, ALARM, AND SLEEP TIMER
Install two AA batteries to save these settings during power loss or
when unplugging the Etón Sound Radio.
The clock, alarm, and sleep timer can be set in either 'standby' or 'on'
mode.

SETTING THE CLOCK

1. Press the radio's or the remote's TIME SET button for 3 seconds;
note that the minutes flash.
2. Use the radio's TUNING/SET buttons or the remote's TUNE +/-
buttons to set the minutes.
3. Give the radio's or the remote's TIME SET button a quick, short
press: note that the hour flashes.
4. Use the radio's TUNING/SET buttons or the remote's TUNE +/-
buttons to set the correct hour.
5. Press the radio's or the remote's TIME SET button to complete the
new time setting and to exit the time set mode.
4
ETÓN SOUND 100 OWNER'S MANUAL