Package Contents; Electrical Safety - DeWalt D25032 Traducido De Las Instrucciones Originales

– Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (l), which also includes the year of
manufacture, is printed into the housing.
Example:
2015 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Heavy-duty rotary hammerdrill
1 Side handle
1 Depth adjustment rod
1 Keyless chuck (D25134, D25144)
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. 1, 5, 8)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Variable speed switch
b. Main handle
c. Forward/Reverse lever
d. Mode selector
e. Mode selector button
f. SDS Plus tool holder
g. Depth adjustment rod
h. Side handle
i. Depth rod button
j. Sleeve
k. Dust cover
l. Date code
m. Locking collar (D25134, D25144)
n. Keyless chuck (D25134, D25144)
o. Side handle work light (D25144, D25263)
p. Battery door screw (D25144, D25263)
q. On/off light button (D25144, D25263)
INTENDED USE
The D25032 heavy-duty rotary hammer has been
designed for professional drilling, hammerdrilling,
and screwdriving. The D25033, D25133, D25134,
D25143, D25144 and D25263 heavy-duty rotary
hammers have been designed for professional
drilling, hammerdrilling, screwdriving and light
chipping.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These hammerdrills are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Torque Limiting Clutch
All rotary hammerdrills are equipped with a torque
limiting clutch that reduces the maximum torque
reaction transmitted to the operator in case of
jamming of a drill bit. This feature also prevents the
gearing and electric motor from stalling. The torque
limiting clutch has been factory-set and cannot be
adjusted.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
e
accordance with EN 60745; therefore no
earth wire is required.
english
29