Definitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt D25032 Traducido De Las Instrucciones Originales

english
Chiselling
Vibration emission
value a = m/s
h,Cheq
Uncertainty K = m/s
Screwdriving without
impact
Vibration emission
value a = m/s
h
Uncertainty K = m/s
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
26
D25032 D25033
— 12.5
2
— 1.5
2
<2.5 <2.5
2
1.5 1.5
2
10 Amperes, mains
13 Amperes, in plugs
D25133 D25134 D25143
14.9 14.3 13.8
1.5 1.5 1.5
<2.5 <2.5 <2.5
1.5 1.5 1.5
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
HEAVY-DUTY ROTARY HAMMERDRILL
D25032, D25033, D25133, D25134, D25143, D25144,
D25263
D WALT declares that these products described
e
under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009 +A11:2010,
EN60745-2-6:2010.
These products also comply with Directive
2004/108/EC (until 19.04.2016), 2014/30/EU (from
20.04.2016) and 2011/65/EU. For more information,
please contact D WALT at the following address or
e
refer to the back of the manual.
The undersigned is responsible for compilation of
the technical file and makes this declaration on
behalf of D WALT.
e
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Strasse 11,
e
D-65510, Idstein, Germany
16.04.15
D25144 D25263
13.8 8.1
1.5 1.5
<2.5 <2.5
1.5 1.5