Safety Precautions - Campingaz 200 S Instrucciones De Empleo

Ocultar thumbs Ver también para 200 S:
Tabla de contenido

Publicidad

GB
- Apply
gas
leak
cylinder/relief valve/pipe/stove unions.
- The control knobs should remain as set (  ).
- Open the gas supply (valve or lever on the
relief valve).
- Any gas leaks will be indicated by bubbles.
- Tighten the collars if fitted to stop the leak.
Replace any defective parts. The stove must
not be used until all leaks have been
eliminated.
- Close the valve on the gas cylinder.
Important:
An overall inspection and leaks check must be
carried out at least annually and always after
changing the gas cylinder
E - USE

SAFETY PRECAUTIONS

It's recommended that protective gloves
be worn to handle components which may
be very hot.
Do not use the stove within 20 cm of a wall
or similar surface, or any combustible
object.
Place the stove on a horizontal surface
and never move it while it is in operation.
In the event of a leak (smell of gas), close
all valves.
Wait until the device has completely
cooled before handling or storing it.
After use, always close the valve on the
relief valve or gas cylinder.
Do not use containers of diameter greater
than 26 cm or less than 16 cm. Never use
this appliance without its pan
The lock screws located on each side of
the lid must be locked to prevent any
unintentional closure of the lid.
detecting
liquid
to
.
supports.
the
Keep young children away from the
appliance, some parts can be very hot.
Wait until the appliance has completely
cooled before any handling for storage.
After use, always close the regulator or
gas cylinder valve.
Never move the appliance when it is
operating.
1) Setting up
Open the lid.
After opening the appliance, unfold the side
windshields and hook the small side catches
onto the lid.
Note that the side windshields are removable
and washable.
Check that the pan support attachments are
correctly positioned in their rubber housings.
-12-

Publicidad

Tabla de contenido
loading

Tabla de contenido