Care And Maintenance; Checks After Cleaning And Maintenance - Hilti SC 55W Manual Del Usuario

5.7.4 Using the saw on the guide rail
1. Secure the guide rail from below with two screw clamps.
2. Position the circular saw on the guide rail a short distance from the starting point of the cut. Open the
guard manually when making longitudinal cuts (ripping) at cutting angles of 20°- 50°.
The saw must be placed on the guide rail behind the workpiece.
Take care to ensure that the saw blade is not in contact with the workpiece.
3. Switch on the circular saw.
4. Push the saw at a steady speed across the workpiece.
➥ At cutting angles under 20° the pivoting guard opens automatically when it makes contact with the
lateral actuating edge.
➥ It closes again automatically when the saw leaves the end of the guide rail.
5.8 Sawing with or without sawdust extraction
The circular saw has a connector that fits common types of vacuum cleaner hose with a diameter of 27 mm.
A suitable adapter might be required for connecting the vacuum-cleaner hose to the circular saw.
If possible, always use a suitable mobile dust removal system for wood and wood and mineral materials.
If you are working without a sawdust extractor, turn the ejector so that the sawdust is directed away from you.
Always use a filter class P2 dust mask and always ensure adequate ventilation to help minimize
exposure to dust.
6

Care and maintenance

6.1 Care and maintenance
WARNING
Electric shock hazard! Attempting care and maintenance with the supply cord connected to a power outlet
can lead to severe injury and burns.
▶ Always unplug the supply cord before carrying out care and maintenance tasks.
Care
• Carefully remove any dirt that may be adhering to parts.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
Maintenance
WARNING
Danger of electric shock! Improper repairs to electrical components may lead to serious injuries including
burns.
▶ Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical
specialists.
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Store or online at: www.hilti.group.
6.2

Checks after cleaning and maintenance

After cleaning or maintenance, check that all safety devices are fitted and that they function faultlessly.
*2092359*
12
2092359 English 21