Possible Misuse; Technical Data - Hilti SC 55W Manual Del Usuario

3.3 Intended use
The product described is a circular saw. It is designed for cutting wood or wood-like materials, plastics,
gypsum plasterboard, gypsum fiberboard and composite materials, up to a cutting depth of 55 mm, and for
miter cuts at angles up to 50°.
3.3.1

Possible misuse

Do not use saw blades not compliant with the technical data and do not use cutting discs, abrasive wheels
or saw blades made of highly alloyed high speed steel (HSS steel). Do not use this power tool to saw metal.
3.4 Items supplied
Circular saw, saw blade, hex key, rip fence, operating instructions.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Store or online at: www.hilti.group
4

Technical data

4.1 Technical data
For rated voltage, frequency, current and input power, please refer to the country-specific type
identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the device. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the device.
Weight, small base plate
Weight, large base plate
Saw blade diameter
Saw blade disc thickness
Saw blade arbor size
Cutting depth at 0°
Cutting depth at 45°
Cutting depth at 50°
No-load speed
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L
WA
Sound pressure level (L
Uncertainty
18 English
)
)
pA
4.5 kg
4.7 kg
160 mm ... 165 mm
1.1 mm ... 1.5 mm
20 mm
0 mm ... 55 mm
0 mm ... 41 mm
0 mm ... 37 mm
5,500 /min
101 dB(A)
90 dB(A)
3 dB(A)
2092359
*2092359*