Tabla de contenido
Publicidad
This will assist you in the programming process:
If the number of the setting value exceeds the number "5", the
controller will emit a long beep and a long flashing frequency. This
makes it easier to recognize the selection with larger values (larger
numbers).
Examples, if the LED flashes as follows:
1.
"1x long flashing frequency + one short flashing frequency"
(Motor: "Beep --- Beep") = Selection option/value - "No. 6".
2.
"1x long flashing frequency + 2x short flashing frequency"
(Motor: "Beep --- BeepBeep") = Option/Value - "No. 7 "
PROGRAMMING OF THE CONTROLLER WITH THE PROGRAMMING BOX
(optionally available under the order number 500906143)
The portable program box allows you to quickly and easily set the
speed controller.
Use the instructions on the "TABLE 1" program box to do this.
Programmable settings (the italic texts are the default settings)
Settings for Dragster speed controller
Programmable
Settings
1. Driving mode
2. Selection LiPo cells
3. Undervoltage safety shutdown
4. Speed controller Thermal insulation:
no function
5. Motor Thermal insulation
6. Motor Direction of rotation
7. BEC Voltage
8. Brake force adjustment
9. Setting Reverse
10. Acceleration (punch)
11. Braking effect with neutral position/
engine brake
GB // 14
3.
4.
5.
1
2
3
Forward
Forward
with
/ reverse
brake
with
brake
Car
2S
3S
disabled
Car (Low)
Car
(Medium)
disabled
clockwise
counter-
clock-
wise
6.0 V
7.4 V
12%
25%
37.5%
25%
50%
Level 1
Level 2
Level 3
0%
2%
4%
"1x long flashing frequency + 3x short flashing frequency"
(Motor: "Beep --- BeepBeepBeep") = Selection option/value
- "No. 8"
And so on...
"2x long flashing frequency (motor beep—beep--)" Option/
Value - "No.10"
"2x long flashing frequency + 1x short flashing frequency
(motor beep—beep--beep)" Option/Value - "No.11"
External Programming:
Connector for connecting
a programming box (Item
no. 500906143)
Programmable value
4
5
Car
(High)
50%
62.5%
75%
Level 4
Level 5
6%
8%
10%
6
7
8
9
87.5%
100%
deak.
12%
14%
16%
Publicidad
Tabla de contenido
