brondell Capella Manual Del Proprietário página 14

PRODUCT INSTALLATION
Step 3: Drain Clamp Installation
b. Insert the end of the guide into the 3/8-inch hole in the drain
pipe, and slide the clamp with the foam against the pipe,
lining up both holes. Take the back half of the drain clamp and
position it against the back side of the drain pipe. Screw the
bolts through both halves of the drain clamp, and apply the
nuts to secure. Do not over-tighten.
c. Once the drain clamp is secure on the pipe, remove the guide.
4. Take the end of the 3/8-inch black drain tube from the faucet,
and insert into the 3/8-inch Quick Connector on the drain clamp
and push firmly in place.
12
Step 3b
Step 4