Step 4: Filter Head Connection Assembly Installation - brondell Capella Manual Del Proprietário

PRODUCT INSTALLATION
Step 4:
Filter Head Connection Assembly Installation
Be sure to install the Filter Head Connection Assembly so that the top of the
assembly is at least 14 inches from the floor of the sink cabinet. Otherwise, the
filters will not install correctly.
1. Using a pencil, mark where the Filter Head
Connection Assembly will be mounted to the
sidewall of the cabinet (at least 14 inches from
the cabinet floor). Use a level to make sure
that the Assembly will be mounted straight.
NOTE: Before you mount the Connection
Assembly, it may be a good idea to practice
inserting and removing the filters.
2. Insert the two mounting screws through the
holes in the Assembly frame, and screw into
the cabinet sidewall.
Step 2
13