Checking High Pressure Fuel Pump Drive Belt - Yamaha Z150P Manual Del Propietário

EMU01189
CHECKING HIGH PRESSURE FUEL
PUMP DRIVE BELT
Inspect the high pressure fuel pump drive
belt and replace it if any of the following
signs is observed:
8 Cracks in the back of the belt or in the
base of belt teeth.
8 Excessive wear at the roots of cogs.
206016
8 Rubber portion swollen by oil.
8 Belt surfaces roughened.
8 Signs of wear on edges or outer surface
of belt.
cC
Consult your Yamaha dealer when replac-
ing or adjusting the high pressure fuel
pump drive belt.
NOTE:
If the high pressure fuel pump drive belt
can be stretched by 10 mm (0.39 in) or
more by pushing with your finger in the
middle between the pulleys, the belt ten-
sion needs adjustment.
4-19
GB