RECORDING/PLAYBACK
Recording Files
Video Recording
Slide the mode switch to select
!
(video) mode.
To stop recording
Press START/STOP again.
To view the last recorded scene
A
Select
while recording is paused.
$
Selecting
during playback deletes that
scene.
To record a still image during video
recording
Press SNAPSHOT.
NOTE
•
The video recording mode is automatically selected when you turn off the camcorder and then
turn on again.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off
automatically to conserve power.
•
Do not move or shake the camcorder suddenly during recording.
If you do so, the driving sound (hum) of the hard disk may be recorded.
SNAPSHOT
Press PLAY/REC to select the
recording mode.
Press START/STOP to start
recording.
You can also start/stop recording by
selecting [REC] on the LCD monitor.
(On-screen recording control)
To change the video quality
Change the settings in [VIDEO QUALITY].
To change the aspect ratio of the image
(16:9/4:3)
Change the settings in [SELECT ASPECT
RATIO].
Approximate remaining
time for recording
EN
1