Grandstream GXP1520 Guía De Instalación Rápida página 5

Tips For Using the Keypad:
Line Key
Message
Phonebook
Page/Intercom
Call Encrypt
Hold
Standard Keypad
1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/RIGHT but-
tons.
3. Press the round MENU button to confirm a menu selection.
4. The phone automatically exits MENU mode when there is an in-
coming call, the phone goes off-hook, or when the MENU mode is
left idle for 60 seconds.
PHONE CONFIGURATION:
Configure the GXP1520/1525 Using Web Browser:
1. Ensure your phone is powered up and connected to the Internet.
2. Press MENU button to go into menu of the phone.
3. Press the 'down" arrow button to "Status" and press MENU button
to check the IP address.
4. Type the phone's IP address in your PC browser. (See figure on
the right)
5
Message Waiting
Indicator
Softkey
Record
Menu/OK key
Navigation keys
Mute
Headset
Conference
Transfer
Speaker
Send
Volume
5. The default administrator username and password are "admin";
the default end-user username is "user" and the password is "123".
Configure the GXP1520/1525 using the Keypad:
1. Make sure the phone is idle.
2. Press the MENU button to access the keypad MENU to configure
the phone.
3. Select MENU->Config, to configure settings for SIP Proxy, Out-
bound Proxy, SIP User ID, SIP Auth ID, SIP Password.
4. Follow MENU options to configure the basic features of the phone.
For example: the IP address if using a static IP. For details, please
check GXP1520/1525 User Manual.
5. Please contact your ITSP (Internet Telephony Service Provider)
for additional settings that may be necessary to configure the phone.
Note: For the detailed user manual, please download from:
http://www.grandstream.com/support
6