UFESA SF1410 Alizé Manual De Instrucciones página 17

USE
Before each use check that the appliance is in good condition and that the electric cable is not
damaged; if the electric cable is damaged, it must be replaced by the manufacturer or by the technical
assistance service or, in the event, by a qualified technician, in order to avoid any type of danger.
Insert the plug into the mains socket.
Set wind speed
Adjust the fan speed by rotating the speed switch.
0. OFF
1. Low Speed
2. Medium Speed
3. High Speed
Set Oscillation (Fig 2)
Set oscillation by pulling and depressing oscillation knob on the motor cover.
Pull up: Stop Oscillation
Depress: Oscillation
Fan Tilt
Adjust fan tilt angle by gently pushing upwards or downwards.
Ensure that fan is switched off before adjustment.
During long periods of inactivity, disconnect the plug from the mains socket.
MANITENANCE AND CLEANING
Warning: before carrying out the normal cleaning operations, remove the plug from the mains socket.
To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive products.
Do not immerse any part of the fan in water or any other liquid: if this happens, do not immerse your
hand in the liquid and, first of all, remove the plug from the mains socket. Dry the appliance carefully
and check that all the electrical parts are not wet: if in doubt, contact a qualified technician.
It is essential to keep the ventilation holes of the motor free of dust and fluff.
In case of long periods of non-use store the fan, protecting it from dust and moisture; we recommend
using the original packaging.
If you decide to stop using the appliance, it is advisable to render it in operational by cutting the power
cable (ensuring first that the plug has been disconnected from the mains socket) and making sure that
parts that could be dangerous in the hands of children (e.g. the blade) can cause no harm.
17