Seca 763 Manual De Instrucciones página 10

3. Printer function
Insert paper
The printer uses thermal paper. You can order this either directly from seca (see "Spare
parts and accessories" on page 12) or from a specialist supplier. The rolls of paper may
not exceed the following dimensions: ø 28 mm, width 57 mm.
To insert the roll of paper, proceed as follows:
– Lift the transparent flap of the printer a
little way until the paper dispenser flips
up with a click.
– Now open the paper dispenser fully by
pulling it forwards from the rear.
– Remove the packaging from the ther-
mal paper.
– Unroll a little of the paper.
– Insert the roll in the paper dispenser so
that the printable outside of the paper is
facing the tearing edge.
– Push the paper dispenser of the printer
closed. Ensure that the flap engages
with an audible click.
Warning!
The flap must be closed (engaged) cor-
rectly, otherwise the printing unit may
be damaged.
10
tearing edge