Project Source 67210-0501 Manual De Instrucciones página 3

PREPARATION
Before beginning the assembly of this product, make sure all parts are present. Compare parts with
the package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly Time: 45 minutes (including removal of old faucet)
Tools Required for Assembly (not included): Adjustable Wrench, Phillips Screwdriver, Silicone
Sealant, Allen Wrench
Helpful Tools (not included): Basin Wrench, Water Supply Lines
ASSEMBLY INSTRUCTIONS
1. Shut off the water supply and remove the
old faucet.
2. Install the faucet:
a. Remove the preassembled mounting
nuts (C) from the faucet (A) and place
the base plate (B) and the faucet (A)
in position on the sink.
b. From under the sink, thread the
mounting nuts (C) onto the faucet (A).
c. Tighten the mounting nuts (C).
Note: If the sink surface is uneven, use
silicone sealant (not included) to create a
watertight seal.
1
2
C
3
A
B
Lowes.com
®