Project Source 67210-0501 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
3. Connect a 1/2 in. IPS faucet connector or
coupling nuts (not included) with 3/8 in.
O.D. ball-nose risers (not included) to the
water supplies underneath the sink using
wrenches (not included).
Note: Refer to the local plumbing codes for
permissible types of water supply
connectors.
4. Before tightening the faucet connector to the
water supply, apply a second wrench to the
tube from moving or twisting when tightening
the faucet connector. Do not overtighten.
OPERATION INSTRUCTIONS
1. After the installation is complete:
a. Remove the aerator on the faucet (A).
b. Turn on the water supply and allow both
hot and cold water to run for at least one
minute each.
c. While the water is running, check for leaks.
d. Replace the aerator.
3
4
1
A
4
Lowes.com
®