GB
Translation of the German declaration
We,
Cardo Door Production GmbH
Normstahlstrasse 1-3
D-85368 Moosburg, Germany
hereby declare that we have applied and complied with the following basic requirements of the EC Directive 2006/42/EG in the
design and manufacture of the partially completed machinery described below: 1.1.2, 1.1.3, 1.2.1, 1.2.3, 1.2.4, 1.2.6, 1.3.2,
1.3.4, 1.5.1, 1.5.2, 1.5.3, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.5.9, 1.6.3, 1.7.3, 1.7.4
The special technical documents have been compiled in accordance with Appendix VII Part B of the EC Directive 2006/42/EG.
We undertake to submit these in electronic form to the market supervisory authorities upon demand within a reasonable time.
Description of the partially completed machinery
Function
Electrical garage door operator with radio remote control
Model
Magic
Type
Magic 1000
Harmonised standards applied
DIN EN ISO 12100-1:2004-04
DIN EN ISO 12100-2/A1:2009-10
DIN EN ISO 13849-1:2008-12
DIN EN 13241-1:2004-04
Other applied directives
Construction Products Directive 89/106/EWG
Low Voltage Directive 2006/95/EG
The following tests were conducted by these approved bodies:
TÜV SÜD Product Service GmbH
Reg. No. 063795
Ridlerstrasse 65 - D-80339 München, Germany
The partially completed machinery may not be put into operation until it has been determined that the machinery into which the
partially completed machinery is to be installed complies with the regulations of the Machinery Directive.
Wolfgang Schulz, Managing Director
Moosburg, 01.12.10
Magic 1000
Declaration of incorporation
Safety of machinery – basic concepts, general principles for design – Part 1
Safety of machinery – basic concepts, general principles for design – Part 2
Safety of machinery – Safety-related parts of control systems - Part 1
Industrial, commercial and garage doors and gates – Product standard – Products
without fire resistance and smoke control characteristics
EMC 2004/108/EG
1999/5/EG R&TTE
Mikes
Reg. No. D-PL-12030-01-03
Ohmstrasse 2-4 - D-94342 Straßkirchen, Germany
Test results (passed)
- Safety requirements closing forces
- Electrical safety
- Mechanical requirements
- Electromagnetic compatibility
N000925 12/2010
175 / 214