Wahl 1872 Traducción Del Manual De Uso Original página 13

f For a good and long-lasting cutting performance, it
is important to oil the blade set frequently
f If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade
set should be replaced.
Changing the blade set
Warning! Injuries and material damage due to
incorrect handling.
f Switch the appliance off and disconnect from the
power supply before changing the blade set.
1. Switch the appliance off using the on/off switch (Fig. 3ⓑ)
and disconnect from the power supply.
2. Slide the blade set off the housing in the direction of the
arrow (Fig. 7ⓐ). Remove the blade set.
3. Replace the blade set by hooking it into the housing and
pressing it down until it clicks into position (Fig. 7ⓑ).
Problem elimination
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
f Clean and oil the blade set (Fig. 8/90); if this does not
resolve the problem, replace the blade set (Fig. 7).
Battery life is too short.
Carefully clean and oil the blade set (Fig. 8/9). A blade set that
is very dirty and has not been oiled can halve the available bat-
tery life! If the blade set is clean and oiled and the battery life
is still far too short, it is likely that the batteries are nearing the
end of their life.
Battery life generally decreases at a steady rate when
used on a day-to-day basis. The batteries used here
are specially designed for professional and everyday
use, but are also affected by this.
Skin injury
Cause: Too much contact pressure on the skin.
f Reduce contact pressure when cutting close to skin.
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use
and replace the blade set if necessary.
Battery power indicator light does not light up.
Cause: Appliance has not been correctly placed on the charg-
ing stand.
f Ensure that the hand-held appliance has been correctly
placed on the charging stand.
Cause: Defective power supply.
f Ensure that the power supply unit is plugged into the mains
socket.
f Check the mains cable for possible damage.
f Check the power supply.
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2002/96/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
13