Kohler K-T945 Guia De Instalacion página 5

Faucet
Outlet
Port
Flange
Escutcheon
5. Install the Spout
IMPORTANT! Use care when installing the spout to avoid
scratching the finish.
NOTE: Back the setscrew out of the spout or remove it to prevent
damage to the spout shank when installing the spout to the faucet
outlet port.
Insert the inlet end of the spout shank into the faucet outlet port.
Secure the spout assembly using the three provided screws.
Confirm that the O-ring is in the notch on the interior of the spout
escutcheon. Apply plumbers putty or other sealant to the back
surface of the spout escutcheon according to the putty
manufacturer's instructions.
Carefully slide the escutcheon over the spout and install the spout
over the spout shank.
Tighten the setscrew to secure the spout in place.
Press the escutcheon firmly against the finished wall.
Remove any excess putty or sealant.
Kohler Co.
Plumbers
Putty
Screws
Spout
Shank
O-Ring
Setscrew
5
Spout
1023410-2-A