Prepare The Site - Kohler K-T945 Guia De Instalacion

16" (40.6cm)
2x4 Stud
Framing

1. Prepare the Site

NOTE: The wall plate requires special framing and support
considerations. Pay special attention to minimum and maximum
faucet height recommendations noted in the roughing-in sheet.
Refer to the roughing-in dimensions for additional mounting
information.
A suggested framing example is shown. Each installation may have
different framing requirements than those shown.
Construct the framing for your installation.
2. Attach the Wall Plate
Make sure the framing is level and correctly installed.
Secure the wall plate to the framing using six fasteners #10 x 1" pan
head wood screws (not provided).
Kohler Co.
5-5/8"
(14.3cm)
3
Wall Plate
Six Round
Holes
(Typical)
Screws
1023410-2-A