ANCEL FD700 Manual Del Usuario página 13

2.2.3 Injector Quantity Adjustment
In the Engine system, choose [Special Function] and it displays
as follow：
Choose [Injector Quantity Adjustment] and it displays as follows：
Injector Quantity Adjustment
Carry out this procedure to
enter the new IQA date whenever
a fuel in ject is replaced or to
make a correction to the existing
in jector IQA data currently stored
in the PCM.
OK ESC
Press [OK] button to next step:
Select Function
ABS Service Bleed
Reset TCM KAM
Clear Transmission Adaptive T...
DPF Manual Regeneration
IQA
Injector 1
OK
Delete
0
Enter the character IQA
1
data
2
3
4
3/38
11
5/5
Injector Quantity Adjustment
On the following screen,the
diagnostic tester will attempt to
retrieve the in jector IQA data
from the PCM allowing for
verification and data entry.
Perform the following :
OK ESC
EN