ANCEL FD700 Manual Del Usuario página 9

Select Function
Read Fault Codes
Erase Fault Codes
Read Datastream
2.1.2 Erase Fault Codes
Choose [Erase Fault Codes] then press [OK] button, screen
displays as follow:
You need to press [OK] again to clear the fault codes.
It shows as follow after clearing the fault codes.
If you give up clearing fault codes, please press [ESC] button.
1/3
Information
Erase fault codesl
Are you sure?
OK ESC
Information
Erase fault codes had Success.
Please wait 10 seconds.Turn
ignition off and Switch on again.
Read fault codes to verify.
OK ESC
7
Read Fault Codes
P01F0
Coolant Temperature Relapsed
Lower Than Diagnostic
Monitoring Temperature
OK
1/55
ESC
EN