ANCEL FD700 Manual Del Usuario página 21

4.6 Feedback
If it shows connected error with vehicle or other problem during
using, please using the feedback function.
Choose [Tool Setup], click on the [feedback the test result menu]
and it display as follows:
OBDII
EPB reset
ETC reset
Feedback the test result
Automatic recording is ready,
perform the related functions
that require feedback.
After the execution,disconnect
the car,connect to the computer
via USB,use the update.exe tool.
The device will display the "Feedback" prompt and exit the feedback
menu. Press [Esc] to exit to the main menu.
For example: If the Ford ABS system fails to connect, please follow
the steps below:
OBDII
EPB reset
ETC reset
For Ford Oil reset
BAT BMS reset
Tool Setup
OK ESC
For Ford Oil reset
BAT BMS reset
Tool Setup
Language
Beeper
Instructions(Display at startup)
Unit of Measure
Skin Style
Feedback the test result
Device Information
1. Feedback function
When the test function is
abnormal,please use the
Feedback function(tool setup->
feedback->start recording) to
save test records, then use
19
Tool Setup
Instructions
OK ESC
6/7
EN