Technical Data; Ec Declaration Of Conformity - Stanley FATMAX FMC710 Manual De Instrucciones

ENGLISH
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe office at
the address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Stanley Fat Max batteries can be recharged many
times. At the end of their useful life, discard batter-
ies with due care for our environment:
Run the battery down completely, then remove it from the
u
tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
u
to any authorised repair agent or a local recycling station.

Technical data

Voltage V
DC
-1
No-load speed
min
Oscillating angle Degrees
Weight
kg
Charger
Input Voltage
Output Voltage
Current
Approx. charge time
Battery
FMC685L
Voltage
V 18
DC
Capacity Ah 1.5
Type Li-Ion
10
(Original instructions)
FMC710 (Type 1)
18
8000 - 18000
1.4 or 2.8
1.4
905765** 906086**
typ. 1 typ. 1
V 230 230
AC
V 20 18
DC
A 2 2
45 - 120 45 - 120
min
FMC687L FMC688L
18 18
2.0 4.0
Li-Ion Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L ) 94.2 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 105.2 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
2
Cutting wood (a ) 7.9 m/s , uncertainty (K) 1.5 m/s
h, CW
2
Cutting metal (a ) 7.9 m/s , uncertainty (K) 1.5 m/s
h, CM
2
Sanding (a ) 8.2 m/s , uncertainty (K) 1.5 m/s
h

EC declaration of conformity

MACHINERY DIRECTIVE
%
Cordless Oscillating Tool - FMC710
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-4
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more information, please
contact Stanley Europe at the following address or refer to the
back of the manual.
_
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Stanley Europe.
Stanley Europe, Egide Walschaertsstraat14-18,
2
2
2
Kevin Hewitt
Vice-President Global Engineering
2800 Mechelen, Belgium
13/03/2014