Characteristics Of The Fuel; Non-Permitted Fuels - Ravelli HR EVO 300 SMART Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para HR EVO 300 SMART:
Tabla de contenido

Publicidad

EN
Rev.1 08/09/2021
Pag.18

Characteristics of the fuel

Wood pellet is a fuel made of pressed wood sawdust, often recovered from processing scraps of carpentries. The material used
cannot contain any extraneous substance such as, for example, glue, lacquer or synthetic substances.
The sawdust, once it has been dried and cleaned from impurities, is pressed using a die with holes: as a result of high pressure, the
sawdust heats up by activating the natural wood binders; this way the pellet maintains its shape even without adding artificial
substances.
Wood pellet density varies based on the type of wood and can exceed that of natural wood by 1.5 - 2 times.
The cylinders have a diameter of 6 mm and a variable length between 10 and 40 mm.
Their density is equal to approximately 650 kg/m
The UNI EN ISO 17225-2:2014 standard (that replaces the EN PLUS standard) defines pellet quality by specifying three classes: A1,
A2 and B. Maintain fuels and other flammables at a suitable distance.
Ravelli recommends using wood pellet classified A1 and A2 according to the EN ISO 17225-2:2014 standard, or certified DIN PLUS
(more restrictive than the A1 class) or ONORM M 7135. Pellet may be light or dark coloured, it is normally bagged into bags that show
the name of the producer, the main characteristics and classification according to standards.
��
Pellets must be transported and stored in a dry area. Upon contact with humidity they swell and become unusable
��
It is therefore necessary to protect them from humidity, both during transport and during storage.

Non-permitted fuels

We recommend not using the following materials as fuel:
wood
treated wood (painted, lacquered, glued wood etc.);
sawdust or chips
liquid fuel
coal or other fossil fuels
plastic and derivatives
treated paper and cardboard
waste
fuels that release toxic or polluting substances
Using these fuels, on top of being forbidden due to the emission of polluting and harmful substances, causes the appliance to
deteriorate more rapidly and debris to accumulate in the appliance and in the smoke evacuation system, thereby reducing performance
and safety.
��
The gases produced by these fuels are dangerous for the environment and for your health!
��
Using fuel that is not compliant with the above will void the warranty.
Use and maintenance manual HR EVO Smart
. Due to their low water content (< 10%) they have a high energy content.
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hr evo 350 smart

Tabla de contenido