Programming The Remote Control; Programming A Code Into A Remote Mode - LG 42LG70ER Manual Del Propietário

MFL42054502en_3 6/12/08 8:12 AM Page 107

PROGRAMMING THE REMOTE CONTROL

The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable
devices of other manufacturers.
Note that the remote may not control all models of other brands.

Programming a code into a remote mode

Testing your remote control.
1
To find out whether your remote control can operate other components without programming, turn on a
component such as a STB and press the corresponding mode button (such as a S S T T B B ) on the remote con-
trol, while pointing at the component. Test the P P O O W W E E R R and C C H H
responds correctly. If the component does not operate correctly, the remote control requires programming
to operate the device.
Switch on the component to be programmed, then press the corresponding mode button (such as S S T T B B ) on
2
the remote control. The remote control button of the desired device is illumintated.
Press the M M E E N N U U and M M U U T T E E buttons simultaneously, the remote control is ready to be programmed with the
3
code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the
4
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the M M E E N N U U button to store the code.
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
6
buttons to see if the component
107