Fuse Replacement - Broan Elite E55000 Manual Del Usuario

FUSE REPLACEMENT

IF LIGHTS FAIL TO OPERATE, DISCON-
NECT THE POWER AT THE SERVICE EN-
TRANCE. CHECK THE FUSE AND RE-
PLACE IF NECESSARY.
1. Remove the decorative flue.
2. Remove the cover from the fuse box.
3. Locate the fuse holder. Unscrew its cap
and remove the fuse.
4. Replace the fuse with the same size and
amperage (5x20mm, 4amp, 125volt).
CAUTION: Use of a fuse greater than
4 amps may damage the transformer.
5. Reinstall the fuse holder cap, the fuse
box cover and decorative flues.
6. Reconnect power at the service
entrance.
FUSE BOX
- 5 -
DECORATIVE FLUE
FUSE
FIG. 3