UCC T3 installation guide
www.renishaw.com
Environmental conditions
Indoor use
Altitude
Operating temperature
Storage temperature
Relative humidity
Transient voltages
Pollution degree
* NOTE: It may be necessary to house UCC T3 in a suitable electrical enclosure according to the installation's environmental
conditions to obtain a higher IP rating.
NOTE: For ambient temperatures under 40 °C, maximum input power for the UCC T3 is 800 W. For temperatures between 40 °C
and 50 °C the maximum power is 400 W.
WARNING: UCC T3 is not recommended for use in ambient temperatures above 50 °C.
Issued 04 2019
IP30* (BS EN60529:1992)
Up to 2000 m
+5 °C to +50 °C
‐25 °C to +70 °C
80% maximum ﴾non‐condensing﴿ for temperatures up to +31 °C
Linear decrease to 50% at +40 °C
Installation category II
2
7