Carson Reflex Wheel ultimate touch 2.0 Manual De Instrucciones página 69

Backlight:
Firmware update: the internal software (firmware) of the
transmitter can be updated using the USB interface connected
to a PC computer. Once this function is activated, all functions of
the transmitter stop. To avoid any loss of control of the vehicle,
turn its receiver off before entering this mode. A confirmation is
requested.
When the firmware is updating, never disconnect the USB cable or
remove the battery or the transmitter will become unusable.
Factory reset: reset the whole configuration of the transmitter
to its default. All model configurations and other settings are lost
and reset to their default. A confirmation is requested.
adjust the level of the
backlight. A high brightness,
can be useful in a very bright
environment like a sunny
weather. The brighter the
backlight is the shorter the
battery of the transmitter lasts.
Language:
the user interface can be
displayed in several languages.
69 // GB