Declaration Of Conformity - Felisatti JS85/701 Instrucciones De Servicio

to a standstill. In this manner you can avoid kickback and
can place down the machine securely.
Use only sharp, lawless saw blades. Bent or unsharp
saw blades can break or cause kickback.
Do not brake the saw blade to a stop by applying
side pressure after switching off. The saw blade can be
damaged, break or cause kickback.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company for
assistance. Contact with electric lines can lead to ire and
electric shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or may
cause an electric shock.
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when the
cable is damaged while working. Damaged cables increase
the risk of an electric shock.
4
Do not dispose of electric tools in the
household waste!
In accordance with European Directive
2002/96/EC relating to old electrical and
electronic appliances and its translation
into national law, used electric tools must
be collected separately and recycled in an
ecologically desirable way.

DECLARATION OF CONFORMITY

Business name of the manufacturer:
INTERSKOL POWER TOOLS S.L.
Full address of the manufacturer:
Crta. de Sant Joan de les Abadesses,
s/n 17500 RIPOLL-(Girona) SPAIN
Name and address of the person (established
in the Community) who compiled the technical
ile:
Jordi Carbonell
Ctra. de Sant Joan de les Abadesses, s/n
17500 RIPOLL-(Girona) SPAIN
Product name: JIG SAW
Commercial name: JIG SAW
Model: JS85/701, JS85/701VE, JS120/710VE
Type: Electric power tools Serial Number:
see label of the tool Fulils all the relevant
provisions of Directives 2006/42/EC, 2004/108/
EC, 2011/65/ЕС.
We hereby declare, under our sole responsibility,
that the FELISATTI brand products described in
this manual JS85/701,
JS120/710VE comply with the following
standards or standard documents: EN 60745-
1, EN 60745-2-11, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3.
Santiago López
JS85/701VE,