Technical Data - Felisatti JS85/701 Instrucciones De Servicio

CHARACTERISTICS
Cutting capacity: (mm)
Wood
Light alloy
Steel
Inclined cuts up to
Voltage and current
Frequency (Hz)
Absorbed power, W
Strokes per minute
Weight according EPTA-Procedure 01/2003, kg
The instructions contained in this manual must be
strictly followed, it should be carefully read and kept close
at hand to use when carrying out maintenance on the
indicated parts.
If the tool is used with care and normal maintenance is
carried out, it will work well for a long time.
The functions and use of the tool you have bought
shall be only those described in this manual. Any other use
of the tool is strictly forbidden.
Date of manufacture of the machine on an information
plate, as month and year.
ILLUSTRATIONS
IDENTIFICATION (See igures)
A. Housing
B. Switch
C. Principal handgrip
D. Adjustable angle base
E. R.p.m. regulator
F. Protective screen
H. Regulation side rod
I. Switch lock push button
L. Oscillating regulation
M. Switch
STANDARD EQUIPMENT
-Finished product
-Latepal guide
-Rule with centre
-Base shoe
-Wacuum cleaner
APPLICATIONS
The machine is supplied ready for use, the only
operation necessary is the insertion of the blade into the
correct position.
During cutting operations, make sure that the base is
always resting on the work piece.
In order to obtain top quality cutting and optimal
performance, both the amplitude hunt and advancement
must be precisely regulated, depending on the type of
material that is being used (for example: "0" amplitude
hunt and slow advancement should be adopted for sawing
metal).
When cutting metals it is advised to spread a few
drops of oil on the cutting line.
Sheets should always be rested on suficiently stable
supports (chip-board or plywood tables). In this manner
dragging is avoided and the elasticity of the material is
compensated for.

TECHNICAL DATA

JS85/701
85
20
8
± 45
230V/3A
50
701
3000
3
During use, make sure that the power supply cable
does not impede working operations or come into contact
with the tool.
Small work pieces should be securely clamped in
order that they remain in position during working operations
(for example: ix in position with a clamp).
The tool has been designed and constructed to
permit operation in all situations and in absolute safety. In
particular working conditions remember to use protective
gloves and safety goggles. The tool has been designed
and constructed to reduce noise to minimum levels.
(See technical data).In particular working conditions the
maximum sound level at the place of work may exceed
85dBA. In this case the operator must use ear protectors.
Work carefully and maintain the tool in perfect working
order, for your own safety.
The switch itted on the saw prevents accidental
machine starting. However, a locking position has also
been provided.
Your saw is supplied with a transparent anti-chip
screen and with an anti-shavings device. Both of these
devices must be used during working operations.
An oscillatory movement of blade can be obtained,
permitting safe and eficient work to be carried out on any
type of material.
Accessories and their corresponding order number
can be found in our catalogues.
This tool is sold complete with accessories and the
user's manual, contained in a cardboard box (or in a metal
case) of suitable size and thickness for the work that the
tool is intended for. This container should be kept as it will
prove useful for your work.
The environmental conditions, temperature, humidity,
lighting, the correct dislocation of your tool and the
cleanliness of the place of work are important conditions
for personal safety and tool performance. These factors
JS85/701VE JS120/710VE
85
20
8
° °
± 45
230V/3A
50
701
300-3000
3
ACCESSORIES
SAFETY STANDARDS
SWITCH
PROTECTIVE SCREENS
OSCILLATION
PACKAGING
INSTALLATION
120
20
10
°
± 45
230V/3,1A
50
720
300-3000
3
5