Kohler Sterling Spectacle 95337-0 Guia De Instalacion página 6

4. Install the Bath
NOTE: To provide access for securing the connections, temporarily position blocks on opposing ends
between the shroud and the bath rim.
With help, carefully lift the bath into place over the shroud and onto the temporary blocks.
Secure all drain connections and fittings according to the drain instructions.
For a rim-mount faucet, install the faucet and trim according to the faucet and trim instructions.
Make sure that there is adequate support under the bath rim to support the faucet. Refer to the
"Prepare the Rim-Mount Faucet (Optional)" section.
Carefully remove the blocks and make sure that the bath rim engages the top of the shroud on all
sides.
Install the drain flange and overflow cover according to the drain instructions.
Close the bath drain. Fill the bath to the overflow, and check for leaks.
Apply a thin, continuous bead of clear or color-matched 100% silicone sealant to the seam between
the shroud and the finished floor.
1408552-2-A 6
Temporary
Blocks
Sterling