Symbols - Ryobi CR120L Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMbOL SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SyMbOL
Safety Alert
V Volts
Hz Hertz
W Watt
min Minutes
Direct Current
n o
No Load Speed
.../min Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
No Hands Symbol
Recycle Symbols
Li - Ion

SyMbOLS

MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
Voltage
Frequency (cycles per second)
Power
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection marked to comply with ANSI Z87.1
Failure to keep your hands away from the blade will result in serious
personal injury.
This product uses lithium-ion (Li-ion) batteries. Local, state or
federal laws may prohibit disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
5 – English
DESIGNATION/EXPLANATION