Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
MANUEL D'UTILISATION
MANUAL DEL OPERADOR
7-1/4 in. CIRCULAR SAW
WITH LASER
DOUBLE INSULATED
SCIE CIRCULAIRE AVEC LASER
DE 184 mm (7-1/4 po)
DOUBLE ISOLATION
SIERRA CIRCULAR CON LÁSER
DE 184 mm (7-1/4 pulg.)
DOBLE AISLAMIENTO
CSB144LZ
INCLUDES: Circular Saw, 7-1/4 in. Blade,
Blade Wrench, Edge Guide, Tool Bag,
Operator's Manual
TABLE OF CONTENTS
****************
Warnings .........................................2-3
 Symbols ..............................................5
 Electrical .............................................6
 Features ..............................................7
 Assembly .........................................7-8
 Operation .......................................8-12
 Adjustments ..................................... 13
 Maintenance ..................................... 14
 Accessories ......................................14
 Illustrations .......................................16
 Parts Ordering / Service ..... Back Page
WARNING:
To reduce the
risk of injury, the user must read and
understand the operator's manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
All manuals and user guides at all-guides.com
INCLUT : Scie circulaire, Lame de 184 mm
(7-1/4 po), Clé de lame, Guide de chant,
Sacoche, Manuel d'utilisation
TABLE DES MATIÈRES
****************
aux outils électriques ......................2-3
relatifs au scie circulaire ..................3-4
 Symboles ............................................5
 Caractéristiques ................................. 7
 Assemblage .....................................7-8
 Utilisation .......................................8-12
 Réglages ...........................................13
 Entretien ...........................................14
 Accessoires ......................................14
 Illustrations .......................................16
 Commande de pièces /
réparation ..........................Page arrière
AVERTISSEMENT :
réduire les risques de blessures,
l'utilisateur doit lire et veiller à bien
comprendre le manuel d'utilisation avant
d'employer ce produit.
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUYE: Sierra circular, Hoja de 184
mm (7-1/4 pulg.), Llave de la hoja, Guía
de bordes, Bolsa de herramientas, Manual
del operador
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad
para herramientas eléctricas ...........2-3
 Advertencias de seguridad
sierra circular ...................................3-4
 Símbolos ............................................5
 Aspectos eléctricos ............................ 6
 Características ................................... 7
 Armado ............................................7-8
 Funcionamiento .............................8-12
 Ajustes ..............................................13
 Mantenimiento .................................. 14
 Accesorios ........................................14
 Ilustraciones ..................................... 16
 Pedidos de piezas /
servicio .......................... Pág. posterior
ADVERTENCIA:
Pour
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
Para reducir

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Ryobi CSB144LZ

  • Página 1: Tabla De Contenido

    DOUBLE ISOLATION SIERRA CIRCULAR CON LÁSER DE 184 mm (7-1/4 pulg.) DOBLE AISLAMIENTO CSB144LZ INCLUDES: Circular Saw, 7-1/4 in. Blade, INCLUT : Scie circulaire, Lame de 184 mm INCLUYE: Sierra circular, Hoja de 184 Blade Wrench, Edge Guide, Tool Bag, (7-1/4 po), Clé...
  • Página 2: General Power Tool Safety Warnings

    All manuals and user guides at all-guides.com GENERAL POWER TOOL SAFETY WARNINGS  Use personal protective equipment. Always wear eye WARNING protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection Read all safety warnings and all instructions. Failure to used for appropriate conditions will reduce personal follow the warnings and instructions may result in electric injuries.
  • Página 3: Circular Saw Safety Warnings

    All manuals and user guides at all-guides.com GENERAL POWER TOOL SAFETY WARNINGS  Keep cutting tools sharp and clean. Properly maintained SERVICE cutting tools with sharp cutting edges are less likely to bind  Have your power tool serviced by a qualified repair and are easier to control.
  • Página 4: Lower Guard Function

    All manuals and user guides at all-guides.com CIRCULAR SAW SAFETY WARNINGS  Support large panels to minimise the risk of blade  Always wear eye protection with side shields marked pinching and kickback. Large panels tend to sag under to comply with ANSI Z87.1. Failure to do so could their own weight.
  • Página 5: Symbols

    All manuals and user guides at all-guides.com SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result DANGER: in death or serious injury.
  • Página 6: Electrical

    All manuals and user guides at all-guides.com ELECTRICAL DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power tools, When using a power tool at a considerable distance from which eliminates the need for the usual three-wire grounded a power source, be sure to use an extension cord that has power cord.
  • Página 7: Features

    All manuals and user guides at all-guides.com FEATURES PRODUCT SPECIFICATIONS Blade Diameter ............7-1/4 in. Cutting Depth at 51.5º ........1-11/16 in. Blade Arbor .............. 5/8 in. No Load Speed ........5,200 r/min. (RPM) Cutting Depth at 0º ..........2-7/16 in. Input ........120 V, AC only, 60 Hz, 15 A Laser Guide ......
  • Página 8: California Proposition

    All manuals and user guides at all-guides.com ASSEMBLY  Depress spindle lock button and replace blade screw. WARNING:  Tighten blade screw securely by turning it clockwise with the blade wrench. If inner flange bushing has been removed, replace it in NOTE: Never use a blade that is too thick to allow the the correct orientation (per markings on the bushing) outer blade washer (“D”...
  • Página 9: Saw Blades

    All manuals and user guides at all-guides.com OPERATION WARNING: WARNING: Never use abrasive cut-off wheels of any kind with When using the saw, always stay alert and exercise this saw. Use of non wood cutting blades can result in control. Do not remove the saw from the workpiece while property damage or serious personal injury.
  • Página 10 All manuals and user guides at all-guides.com OPERATION USING THE LASER GUIDE If at any time the lower blade guard does not snap closed, unplug the saw from the power supply. Exercise the lower See Figure 12, page 17. guard by moving it rapidly back and forth from the full open position to the closed position several times.
  • Página 11: Bevel Cutting

    All manuals and user guides at all-guides.com OPERATION USING AN EDGE GUIDE WARNING: See Figures 16 - 17, page 18. Use the edge guide provided when making long or wide rip Use clamps or other practical way to secure and cuts with the saw.
  • Página 12: Pocket Cutting

    All manuals and user guides at all-guides.com OPERATION TO BEVEL CUT WARNING: See Figure 21, page 18.  Hold the saw firmly with both hands as shown. Always cut in a forward direction when pocket cutting.  Rest the front edge of the base on the workpiece. Cutting in the reverse direction could cause the saw to climb up on the workpiece and back toward you.
  • Página 13: Adjustments

    All manuals and user guides at all-guides.com ADJUSTMENTS  Unplug the saw. WARNING:  REMOVE the blade before adjusting the laser.  Clamp a straight edge to the straight side of a workpiece. Before performing any adjustment, make sure the tool is unplugged from the power supply and the switch is in the ...
  • Página 14: Maintenance

    All manuals and user guides at all-guides.com MAINTENANCE Electric tools used on fiberglass material, wallboard, spackling WARNING: compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips When servicing, use only identical replacement parts. and grindings are highly abrasive to bearings, brushes, Use of any other parts can create a hazard or cause commutators, etc.
  • Página 15 All manuals and user guides at all-guides.com NOTES 15 - English...
  • Página 16: Règles De Sécurité Relatives Aux Outils Électriques

    All manuals and user guides at all-guides.com RÈGLES DE SÉCURITÉ RELATIVES AUX OUTILS ÉLECTRIQUES Un moment d’inattention pendant l’utilisation d’un outil électrique peut entraîner des blessures graves. AVERTISSEMENT  Utiliser l’équipement de sécurité. Toujours porter une Lire tous les avertissements et toutes les instructions. protection oculaire.
  • Página 17: Avertissements De Sécurité Relatifs Au Scie Circulaire

    All manuals and user guides at all-guides.com RÈGLES DE SÉCURITÉ RELATIVES AUX OUTILS ÉLECTRIQUES DÉPANNAGE  Garder les outils bien affûtés et propres. Des outils correctement entretenus et dont les tranchants sont bien  Les réparations doivent être confiées à un technicien affûtés risquent moins de se bloquer et sont plus faciles à...
  • Página 18: Règles De Sécurité Supplémentaires

    All manuals and user guides at all-guides.com AVERTISSEMENTS DE SÉCURITÉ RELATIFS AU SCIE CIRCULAIRE  Avant de remettre la scie en marche en cours de coupe,  Apprendre à connaître l’outil. Lire attentivement le centrer la lame dans le trait de scie et s’assurer que les manuel d’utilisation.
  • Página 19: Symboles

    All manuals and user guides at all-guides.com SYMBOLES Les termes de mise en garde suivants et leur signification ont pour but d’expliquer le degré de risques associé à l’utilisation de ce produit. SYMBOLE SIGNAL SIGNIFICATION Indique une situation extrêmement dangereuse qui, si elle n’est pas évitée, DANGER: aura pour conséquences des blessures graves ou mortelles.
  • Página 20: Caractéristiques Électriques

    All manuals and user guides at all-guides.com CARACTÉRISTIQUES ÉLECTRIQUES DOUBLE ISOLATION CORDONS PROLONGATEURS La double isolation est un dispositif de sécurité utilisé sur Lors de l’utilisation d’un outil électrique à grande distance les outils à moteur électriques, éliminant le besoin pour un d’une prise secteur, veiller à...
  • Página 21: Caractéristiques

    All manuals and user guides at all-guides.com CARACTÉRISTIQUES FICHE TECHNIQUE Diamètre de la lame....... 184 mm (7-1/4 po) Profondeur de coupe à 51.5º ..42,9 mm (1-11/16 po) Arbre de la lame ..........16 mm (5/8 po) Vitesse à vide .........5 200 r/min (RPM) Profondeur de coupe à...
  • Página 22: Utilisation

    All manuals and user guides at all-guides.com ASSEMBLAGE  Serrer fermement de vis de lame en le tournant vers la droite, à l’aide de la clé de lame. AVERTISSEMENT : NOTE : Ne jamais utiliser une lame trop épaisse pour Si la douille du flasque intérieure a été...
  • Página 23: Lames De Scie

    All manuals and user guides at all-guides.com UTILISATION AVERTISSEMENT : AVERTISSEMENT : Lors de l’utilisation de la scie, toujours être attentif et en Ne jamais utiliser aucune sorte de meules abrasives avec cette scie. L’utilisation de lames autres que pour le bois contrôle de la scie.
  • Página 24: Utilisation Du Guide Laser

    All manuals and user guides at all-guides.com UTILISATION UTILISATION DU GUIDE LASER Si, quelle que soient les circonstances, la garde ne se referme pas instantanément, débrancher la scie. Ouvrir et Voir la figure 12, page 17. fermer complètement et rapidement la garde plusieurs fois. Normalement cela rétablit son bon fonctionnement.
  • Página 25: Guide De Chant Facultatif

    All manuals and user guides at all-guides.com UTILISATION GUIDE DE CHANT FACULTATIF AVERTISSEMENT : Voir figures 16 à 17, page 18. Utilisez le guide de bord fourni lors de longues ou larges Utiliser des serre-joint ou un autre système approprié coupes longitudinales avec la scie.
  • Página 26: Ensemble De Buse À Poussière Facultatif

    All manuals and user guides at all-guides.com UTILISATION AVERTISSEMENT : AVERTISSEMENT : Si vous essayez de scier en biseau sans avoir bien serréle Effectuez toujours la coupe vers l’avant pour découper bouton de verrouillage de biseau, vous risquez de vous une ouverture.
  • Página 27: Réglages

    All manuals and user guides at all-guides.com RÉGLAGES  Débrancher la scie.  RETIRER la lame avant d’effectuer le réglage du laser. AVERTISSEMENT :  Assujettir un bord droit à un côté droit de la pièce de travail. Si le cordon d’alimentation se pose sur la pièce pendant la ...
  • Página 28: Entretien

    All manuals and user guides at all-guides.com ENTRETIEN AVERTISSEMENT : AVERTISSEMENT : Utiliser exclusivement des pièces identiques à celles Ne jamais laisser de liquides tels que le fluide de freins, d’origine pour les réparations. L’usage de toute autre l’essence, les produits à base de pétrole, les huiles pièce pourrait créer une situation dangereuse ou pénétrantes, etc., entrer en contact avec les pièces en endommager l’outil.
  • Página 29 All manuals and user guides at all-guides.com NOTES 15 - Français...
  • Página 30: Advertencias De Seguridad Para Herramientas Eléctricas

    All manuals and user guides at all-guides.com ADVERTENCIAS DE SEGURIDAD PARA HERRAMIENTAS ELÉCTRICAS  Utilice protección el equipo otros. Siempre póngase protección ocular. El uso de equipo protector como mascarilla ADVERTENCIA para el polvo, calzado de seguridad, casco y protección para Lea todas las advertencias de seguridad y las instrucciones.
  • Página 31: Advertencias De Seguridad Sierra Circular

    All manuals and user guides at all-guides.com ADVERTENCIAS DE SEGURIDAD PARA HERRAMIENTAS ELÉCTRICAS  Preste servicio a las herramientas eléctricas. Revise para ADVERTENCIA: ver si hay desalineación o atoramiento de piezas móviles, ruptura de piezas o cualquier otra condición que pueda Nunca utilice discos de trocear abrasivos de ninguna clase con afectar el funcionamiento de la herramienta.
  • Página 32: Función De Protección Inferior

    All manuals and user guides at all-guides.com ADVERTENCIAS DE SEGURIDAD SIERRA CIRCULAR  Al volver a arrancar la sierra en la pieza de trabajo, centre la  Familiarícese con su herramienta eléctrica. Lea hoja en el corte y verifique que los dientes de la misma no cuidadosamente el manual del operador.
  • Página 33 All manuals and user guides at all-guides.com SÍMBOLOS Las siguientes palabras de señalización y sus significados tienen el objeto de explicar los niveles de riesgo relacionados con este producto. SÍMBOLO SEÑAL SIGNIFICADO Indica una situación peligrosa inminente, la cual, si no se evita, causará PELIGRO: la muerte o lesiones serias.
  • Página 34: Aspectos Eléctricos

    All manuals and user guides at all-guides.com ASPECTOS ELÉCTRICOS DOBLE AISLAMIENTO CORDONES DE EXTENSIÓN El doble aislamiento es una característica de seguridad de las Al utilizar una herramienta eléctrica a una distancia herramientas eléctricas, la cual elimina la necesidad de usar considerable de la fuente de voltaje, asegúrese de utilizar el típico cordón eléctrico de tres conductores con conexión un cordón de extensión con la suficiente capacidad para...
  • Página 35: Caracteristicas

    All manuals and user guides at all-guides.com CARACTERISTICAS ESPECIFICACIONES DEL PRODUCTO Diámetro de la Hoja ......184 mm (7-1/4 pulg.) Profundidad de Corte a 51.5º ..42,9 mm (1-11/16 pulg.) Eje de la Hoja .........16 mm (5/8 pulg.) Velocidad sin Carga ........5 200 r/min (RPM) Profundidad de Corte a 0º...
  • Página 36: California - Propuesta De Ley Núm

    All manuals and user guides at all-guides.com ARMADO  Apriete firmemente el tornillo de la hoja; para ello, gírelo ADVERTENCIA: hacia la izquierda con la llave. NOTA: Nunca utilice una hoja tan gruesa que no permita Si se quitó el buje interior de la hoja, vuelva a colocarlo en la orientación correcta (siguiendo las marcas en el acoplar la arandela exterior de la hoja en “D”...
  • Página 37: Hojas De La Sierra

    All manuals and user guides at all-guides.com FUNCIONAMIENTO ADVERTENCIA: ADVERTENCIA: Nunca utilice discos de trocear abrasivos de ninguna clase Al utilizar la sierra, siempre permanezca alerta y en control con esta sierra. De usarse hojas de corte no diseñadas para de la herramienta.
  • Página 38: Escala De Largo Del Corte

    All manuals and user guides at all-guides.com FUNCIONAMIENTO UTILIZACIÓN DE LA GUÍA LÁSER Si en cualquier momento la protección inferior de la hoja no cierra de inmediato, desconecte la sierra del suministro de Vea la figura 12, página 17. corriente. Ponga en movimiento la protección inferior moviéndola rápidamente de atrás hacia adelante, de la posición abierta ADVERTENCIA: a la cerrada, varias veces.
  • Página 39: Cortes Transversales Y Al Hilo

    All manuals and user guides at all-guides.com FUNCIONAMIENTO GUÍA DE BORDES OPCIONAL ADVERTENCIA: Vea las figuras 16 y 17, página 18. Utilice prensas o cualquier otro medio práctico de Utilice la guía de borde siempre al hacer cortes longitudinale asegurar y sostener la pieza de trabajo en una plataforma cortes al hilo largos o anchos con la sierra.
  • Página 40: Para Hacer Cortes En Bisel

    All manuals and user guides at all-guides.com FUNCIONAMIENTO ADVERTENCIA: ADVERTENCIA: Cuando corte cavidades siempre hágalo en dirección Si se intenta hacer un corte en bisel sin que la perilla hacia adelante. Si corta en la dirección inversa puede de ajuste de bisel esté firmemente apretada se puede causar de que la hoja trepe sobre la pieza de trabajo y producir una lesión grave.
  • Página 41: Verificación/Ajuste De La Alineación Del Láser

    All manuals and user guides at all-guides.com AJUSTES  Desenchufe la sierra. ADVERTENCIA:  RETIRE la hoja antes de ajustar el láser.  Fije un filo recto al lateral recto de una pieza de trabajo. Antes de efectuar cualquier ajuste, asegúrese de que la herramienta esté...
  • Página 42: Mantenimiento General

    All manuals and user guides at all-guides.com MANTENIMIENTO Las herramientas eléctricas que se utilizan en materiales de ADVERTENCIA: fibra de vidrio, paneles de yeso para paredes, compuestosde resanar o yeso, están sujetas a desgaste acelerado y posible Al dar servicio a la unidad, sólo utilice piezas de repuesto fallo prematuro porque las partículas y limaduras de fibra de idénticas.
  • Página 43 All manuals and user guides at all-guides.com NOTAS 15 - Español...
  • Página 44 All manuals and user guides at all-guides.com Fig. 1 Fig. 2 A - Spindle lock button (bouton de verrouillage de broche, botón del seguro del husillo) B - Spindle (broche, husillo) C - Inner flange bushing (douille à collerette intérieure, buje de brida interior) D - Blade (lame, hoja) E - Outer blade washer (“D”...
  • Página 45 All manuals and user guides at all-guides.com Fig. 4 Fig. 11 Fig. 8 KICKBACK - BLADE SET TOO DEEP REBOND - PROFONDEUR DE COUPE EXCESSIVE A - Lower blade guard is in up position when CONTRAGOLPE - LA HOJA SE AJUSTÓ making a cut (pendant la coupe, la garde MUY PROFUNDA A - Length of cut scale (échelle de longueur de...
  • Página 46 All manuals and user guides at all-guides.com Fig. 18 Fig. 15 Fig. 21 TOP VIEW OF SAW / VUE DU DESSUS DE LA SCIE / VISTA SUPERIOR DE LA SIERRA A - Straight edge (guide, regla) B - Workpiece (pièce, pieza de trabajo) A - Blade guide notch (encoche de guide de A - Motor housing (boîtier du moteur, alojamiento C - C-clamp (serre-joint, prensa de mano)
  • Página 47 All manuals and user guides at all-guides.com Fig. 23 Fig. 25 A - Saw base (base de la scie, base de la sierra) B - Workpiece (pièce, pieza de trabajo) J - Turn adjustment screw counterclockwise to A - Dust chute (éjecteur de sciure, vertedero de C - Straight side of workpiece (côté...
  • Página 48 This product is covered under a 3-year limited Warranty. Proof of purchase is required. MODEL NUMBER _______________ SERIAL NUMBER ____________________________ RYOBI is a registered trademark of Ryobi Limited and is used pursuant to a license granted by Ryobi Limited. Pour faire une demande de réparations ou obtenir des pièces de rechange, trouver un Centre de réparations agréé...

Tabla de contenido