English (Original Instructions) - DeWalt DWE357 Traducido De Las Instrucciones Originales

COMPACT VARIABLE SPEED RECIPROCATING SABRE SAW
DWE357
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Power output
No-load speed
Cutting capacity in wood/metal profiles/
plastic tubes
Stroke length
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
While cutting board
Vibration emission value a =
h,B
Uncertainty K =
While cutting wooden beam
Vibration emission value a =
h,WB
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Compact Variable Speed Reciprocating Sabre Saw
DWE357
DWE357
V 230
D WALT declares that these products described under
e
AC
Technical Data are in compliance with:
V 230/115
AC
2006/42/EC, EN62841-1:2015, EN62841-2-11:2016.
1
These products also comply with Directive 2014/30/EU and
W 1050
2011/65/EU. For more information, please contact D
min 0–2800
-1
the following address or refer to the back of the manual.
mm 280/100/130
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
mm 29
kg 3.2
Markus Rompel
Vice-President Engineering, E-Europe
dB(A) 90
D WALT, Richard-Klinger-Straße 11,
e
dB(A) 101
D-65510, Idstein, Germany
dB(A) 5
20.12.2019
m/s 2 23.5
m/s 4.0
2
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
m/s 29.0
2
signal word. Please read the manual and pay attention to
m/s 5.6
2
these symbols.





WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EngLIsh
WALT at
e
WALT.
e
15