Technical Specifications; Symbols Used - Silvercrest SEM 1050 A1 Instrucciones De Servicio

Fault
No more water/steam comes
out of the steam nozzle 8 after
approx. 80 seconds.
The three LEDS 23, 26, 27
flash.
20. Technical
specifications
Model: SEM 1050 A1
Mains voltage: 220 – 240 V ~ 50 Hz
Protection
class: I
Power rating: 1050 W
Maximum wa-
ter tank filling
volume
(MAX): approx. 1.2 litres
Pressure: 15 bar
Automatic
switch off: after 30 minutes
72 GB
Possible causes / Action
• This is normal. This is a protective function. Turn the
dial 5 back to OFF and disengage the espresso
button 25 during hot water extraction. Check that
there is enough water in the water tank 3. When the
device has heated up again, the function can be used
again.
• After the steam extraction, the temperature is still too
hot to make a delicious espresso. The device cools
down. You can speed up this cooling process (see
"Accelerating the cooling process" on page 67).

Symbols used

Subject to technical modifications.
Geprüfte Sicherheit (certified
safety): devices must comply with
the generally acknowledged
rules of technology and the Ger-
man Product Safety Act (Produkt-
sicherheitsgesetz - ProdSG). (Not
for UK.)
With the CE marking,
HOYER Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials are marked
with the recycling symbol (3 ar-
rows). The material can be speci-
fied by the recycling number in
the centre (here: 21) and/or an
abbreviation (here: PAP).
AC voltage
The symbol identifies parts that
can be cleaned in the dishwasher.