DeWalt DWE314 Traducido De Las Instrucciones Originales página 28

EngLIsh
TROUBLESHOOTING
Problem Possible
Cause
Unit will not start. Cord not
plugged in.
Circuit fuse
is blown.
Circuit breaker
is tripped.
Cord or switch
is damaged.
26
Possible Solution
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it serviced by an authorised D
agent.)
Reset circuit breaker. (If the product repeatedly causes the circuit breaker to trip,
discontinue use immediately and have it serviced by an authorised D
agent.)
Have cord or switch replaced by an authorised D
WALT repair
e
WALT repair
e
WALT repair agent.
e