Evaporator Mat; Fan Blade; Housing - Boneco H680 Instrucciones De Uso

MONTHLY CLE ANING (CONTINUED)

EVAPORATOR MAT

1. Thoroughly wash the evaporator mat with hot water
and dishwashing detergent.
2. Continue to wring out the evaporator mat in clean hot
water until foam no longer forms.
3. Wind the damp evaporator mat around the drum im-
mediately after washing.

FAN BLADE

Never remove the retaining screw in order to take off
the fan blade! A weight imbalance during reassembly
could cause excessive noise or could even damage
the motor.
1. Soak a cloth or sponge with hot water and detergent.
2. Clean both sides of the fan blade and wipe it off with
clean water.

HOUSING

1. Clean the inside of the housing with a cloth, hot water
and dishwashing detergent.
63
en