Translation of the Original Operating Instructions
Contents:
1.
2.
2.1
Specific safety regulations for circular
saw benches
2.2
2.3
2.4
2.5
3.
4.
5.
6.
6.1.
6.2.
6.3.
6.4.
6.4.1.
7.
7.1.
7.2.
8.
9.
10.
10.1.
10.2.
10.3.
11.
11.1.
12.
12.1.
13.
13.1.
13.2.
13.3.
14.
15.
1. In general
Dear Customer!
17
17
The use of these instructions
17
• makes it easier to become acquainted with the device,
• prevents malfunctions due to improper handling, and
18
• increases the service life of your device.
18
Always keep these instructions close to hand.
19
Only operate this device with exact knowledge of it and comply
19
with the instructions.
20
PROXXON will not be liable for the safe function of the device for:
20
20
• handling that does not comply with the usual intended use,
• other application uses that are not stated in the instructions,
21
• disregard of the safety regulations.
21
21
You will not have any warranty claims for:
21
• operating errors,
• lack of maintenance.
22
For your safety, please comply with the safety regulations at all
22
costs.
22
Only use original PROXXON spare parts.
22
All rights reserved for further developments within the meaning of
technical progress. We wish you much success with the device.
22
22
WARNING!
22
Read all safety warnings and instructions. Failure
23
to follow all safety warnings and instructions listed
below may result in electric shock, fire and/or serious injury.
23
23
KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS FOR
THE FUTURE!
23
23
24
2. Safety guidelines
24
24
2.1 Specific safety regulations for circular saw benches
24
• Do not use deformed or flawed saw blades.
25
• Replace worn bench inserts.
25
• Use only the saw blades recommended by Proxxon. Utilised
25
saw blades must comply with EN 847-1. The saw-cut may
not be smaller than the thickness of the splitting wedge.
25
• Make sure the saw blade is suitable for the material to be
25
sawn.
• Wear hearing protection!
• The sawdust from certain materials can be hazardous to
your health. Therefore, wear a respirator.
• Wear gloves when handling saw blades and rough materi-
als!
• Only operate the saw with a dust suction device! Your saw
has a connecting piece at the back for this purpose. You can
connect a vacuum cleaner here.
• For smaller work pieces, use a push-rod for the feed!
• Never work with a device that has faulty or defective parts.
Your circular saw might no longer be safe. Therefore, have
any damage immediately repaired by the Proxxon Customer
Service!
GB
17